Font Size

SCREEN

Layout

Direction

Menu Style

Cpanel

H2O2-PWM PTH V2 - Pulse Width Modulation With ACL

Are you interested in building the Original Open Source PWM Designed by Zero Fossil Fuel. The H2O2-PWM PTH V2 will allow you to do just that. It is designed to allow the original circuit to function just as ZFF had intended, Or you can take it to the next level by just adding a few more components. In doing so you are building the H2O2-PWM V2 with Through hole Parts. This Board is designed to be a Zero Fossil Fuel CCPWM V2 or CCPWM V2H or H2O2-PWM V2.

Status:  Superseded By H2O2-PWM PTH V2.1.9  Want To Know More?      This Version: V2.1.8

          Update:  PCB Order sent out 9/14/2013
          Update:  Added Operating Instructions/Manual   3/7/2012
          Update:  Added Parts Position Document & Calibration Doc  2/11/2012
           Update H2O2-PWM PTH V2 Boards have arived
           Update Beta testing has ended   7/12/2011
           Update Devrlopment Starded On H2O2-PWM PTH V2  4/18/2011

For all you DIY guys, Here is your opportunity to make the H2O2-PWM PTH V2 with minimal effort. We offer The Etched board so all you have to do is populate it with the components that you have obtained. Or perhaps you are interested in a Kit that has all the parts that are needed to make this an enjoyable experience. Just utilize your soldering skills and have fun. Now if you are short on time the H2O2-PWM PTH V2 Board is Available Assembled and ready for you to install in a DIY case.

 

                                            H2O2-PWM PTH V2.1.8

Raw PCB, Out of Stock  Kit Coming Soon Completed & Tested units, Out Of Stock

Solution Graphics

Solution Graphics Solution Graphics
See Store
     For Current Price  

See Store
     For Current Price  

See Store
     For Current Price  
Solution Graphics

 Video Links:

   No Videos At this time.

 

 Pictures: 

  Snapshot 1, Snapshot 2, Snapshot 3, Snapshot 4, Snapshot 5, Snapshot 6

 

 Related Links:

  Building the PWM Case

 

Open Source Documents:

  •  
  • Part Description              Pulse Width Modulator With ACL Build A ZFF CCPWM V2 or H2O2-PWM V2
  • Physical Dimensions      W 2.1in X D 1.5in X H 0.55in  (W 53.4mm X D 38.1mm X H14.0mm)
  • Bill of Materials               Text BOMAutomatic BOM
  • Schematics                     PDF(Page 1)
  • Parts Positions               PDF(Page 1)
  • Board Layout                  Pending
  • Specifications                 Pending
  • Calibration                       PDF(Page 1)
  • Firmware                         Not Needed
  • Assembly Instructions    Video#46
  • Operating Instructions    PDF(Pages1-3)
  • Computer Software        Not Needed