Videos

 

#7 H2O2 - PCB Verification and PCB Tinning 9:28 12-Nov-08 Comments: 2 Covering how to verify each trace to ensure conductivity, and make sure no traces are shorted to one another. Also how to protect the bare copper board from oxidation, How to tin a PCB the inexpensive way. #6 H2O2 - Etching A PCB With Acid Copper II 9:23 6-Nov-08 Comments: 11 Update 11/7/2008: This is the link I followed to make the Acid Copper II AKA (Cupric Chloride) etchant http://www.instructables.com/id/Stop-using-Ferric-Chloride-etchant!--A-better-etc/ Etching H2O2 PWM V2.0.1 With Acid Copper II, This is my experience with the Regenerative etching acid. It has no disposal of toxic waste like each time you use up your Ferric chloride etchant. This was the original article on how to make Acid Copper II it is much harder to make the solution, but is worth the read especially Bath Analysis. http://members.optusnet.com.au/~eseychell/PCB/etching_CuCl/index.html #5 H2O2 - Applying Transfer paper to PCB, Part 4 of 4 5:07 30-Oct-08 Comments: 5 Part 4 of a 4 part series. This is the Ins and outs of applying Transfer paper to a PCB surface mount or standard through hole and will work for any project. The Paper is STAPLES "photo basic gloss" Item#666176 4x6in but any size of STAPLES "photo basic gloss" will work. #4 H2O2 - Applying Transfer paper to PCB, Part 3 8:48 30-Oct-08 Comments: 0 Part 3 of a 4 part series. This is the Ins and outs of applying Transfer paper to a PCB surface mount or standard through hole and will work for any project. The Paper is STAPLES "photo basic gloss" Item#666176 4x6in but any size of STAPLES "photo basic gloss" will work. #3 H2O2 - Applying Transfer paper to PCB, Part 2 8:52 30-Oct-08 Comments: 0 Update 11/27/2008: When soaking The Paper in water place 2-3 drops of Dish soap (Surfactant) in Vary Vary hot water and let soak about 1 hour. This will cause the water to penetrate the paper and it will come right off. Part 2 of a 4 part series. This is the Ins and outs of applying Transfer paper to a PCB surface mount or standard through hole and will work for any project. The Paper is STAPLES "photo basic gloss" Item#666176 4x6in but any size of STAPLES "photo basic gloss" will work. #2 H2O2 - Applying Transfer paper to PCB, Part 1 of 4 8:53 30-Oct-08 Comments: 4 UpDate 12/19/2008: The paper is for InkJet printers but to make a transfure you must print on the paper with a Laser Printer Only. Update 11/27/2008: When soaking The Paper in water place 2-3 drops of Dish soap (Surfactant) in Vary Vary hot water and let soak about 1 hour. This will cause the water to penetrate the paper and it will come right off. Update: I sugest using only Black when you print, The Color Masking seems thiner. This is the Ins and outs of applying Transfer paper to a PCB surface mount or standard through hole and will work for any project. Part 1 of 4 The Paper is STAPLES "photo basic gloss" Item#666176 4x6in but any size of STAPLES "photo basic gloss" will work. #1 H2O2 PWM V2.0.0 5:11 23-Oct-08 Comments: 8 Come visit the website: http://www.h2o2fromh2o.oregonsouth.com Update: Original Release This PWM is based on ZeroFossilFuel Auto Current limiting PWM V2. It has been improved, and is very close to final testing. Plese use the comments and talk about it. This layout partlist and schematic will be released to the public for free. UpDate 12/9 The Website is up and running http://www.H2O2FromH2O.oregonsouth.com